We are searching data for your request:
Forums and discussions:
Manuals and reference books:
Data from registers:
Upon completion, a link will appear to access the found materials.
Chemical pickling, thanks to a gel (Dilunett type from Durieu): devoid of solvent, this gel is applied using a brush with synthetic bristles and the tools are rinsed with water. Then scrape the wood with a spatula.
If this is not enough, in particular to clean all the rough edges of the wood, use a heat gun. You can also make the wood look beautiful by plugging holes and cracks with a quick-drying, easily sanded acrylic wood paste. Always proceed in two passes to fill the deepest gaps.
Preparation of metal parts
For metal parts, choose Rustol, an anti-corrosion print that blocks rust, after careful brushing and dusting. Then use a glycerophthalic paint, reinforced with an anti-rust.Paint a smooth surface
Your kitchen in white laminate "takes you out of your eyes" ... No need to change everything, even if this type of support, very smooth, is a little difficult to work: there are specific undercoats (Julien type) which allow you to '' use the finish of your choice. Beforehand, the bottoms must be washed and rinsed well then degreased with a powerful solvent (trichlorethylene or acetone depending on the support). As this undercoat has a slightly satin white appearance, it lends itself perfectly to the use of stain which will offer a very light appearance.
Yes you said correctly
You are wrong. I offer to discuss it. Write to me in PM, we'll talk.
In my opinion, it is actual, I will take part in discussion.
A very useful topic
How often do you publish news on this topic?